Steering Column Tube

23070 Semi-Gloss Olive Drab Late WWII Paint 1 Gallon
September 26, 2016
Shim Kit for Steering King Pin Bearings
September 26, 2016
Show all

Steering Column Tube

$20.00


Fits: CJ3A, Cj3B, M38A1, M170, CJ5

Can be made to fit by shortening: MB, GPW, CJ2A

SKU: c6428b47e513. Category: .
Description

This is a reproduction steering column tube. This is the outer cover tube for the worm gear or steering shaft. This has the machined inner ring for the upper bearing to pop in to. It also has the slot in the bottom for slipping over the upper bearing retainer on the steering box.  This is exactly 34 1/2″ long. It is designed for the 49-71 jeeps. Note: We have trimmed these down before to make them fit the 41-48 jeeps we have built. If you plan to shorten this, make sure it is done from the bottom.  Make sure to cut another notch so the lower end will fit over the bearing retainer.  This has no cut out for the early horn brush. Part number 914054

Additional information

Additional Information

Weight2.1 lbs
Dimensions4 × 4 × 36 in
WordPress Lightbox