Additional information
Weight | 0.625 lbs |
---|---|
Dimensions | 9 × 7 × 0.3 in |
$9.50
This is a very correct and very high quality US Made reproduction. This is the jerry can strap bracket. This is the little bracket that was added just above the jerry can carrier. It’s job was to not only keep the strap centered on the can but space it out away from the body. This spaced it just enough to keep the can bottom flat on the carrier. If you have an original body still on your jeep and have four holes just above the can carrier reinforcement plate, than this is the bracket you need. This will not work with a tailgate due to the rolled edge on the tailgate. This is for the MB and GPW WWII jeeps.
Part Number: A-4130
Weight | 0.625 lbs |
---|---|
Dimensions | 9 × 7 × 0.3 in |
6654 Lafayette Rd
Chickamauga, GA 30707
M-Fri 8 AM – 4 PM
Store 423-762-5858
Fax 706-375-6137
Email QTMParts@yahoo.com